 Itrademarket Priority
Listed Since 2008 |
|
Empang Bahagia - ebahagia
Indonesia |
|
| | |
|
| Products Catalog: Density Meter FG-K1-300-KW |
(Product Photo) |
| Specification: | The Kittiwake Density Meter is suitable for diesel & residual fuel oils. Use it to confirm the quantity of fuel delivered, verify that the correct grade of fuel has been delivered, estimate the combustion performance ( CCAI) , correct viscosity in cP to cSt.
The Density Meter can be purchased as a stand-alone kit, supplied in its own case, or as part of a more extensive suite of testing equipment in the Fuel and Lube Oil Test Cabinet , or Power Plant Laboratory .
The Kittiwake Density Meter has been proven to be as accurate as laboratory methods. Click this link to view an independant report from a leading analysis laboratory.
Hydrometers
The Density Meter measures density using a hydrometer dropped in warmed oil. Most oil can be measured at 50º C but for very viscous oils the units can be set to warm to 70º C.
There is a calculator feature, which allows the reading to be adjusted to show Density at 15 º C in a vacuum. If the viscosity is known in Censtistokes or Centipoise the calculator will display the CCAI.
The Density Meter uses Hydrometers to measure the density of marine fuels corrected to kg/ m3 at 15oC. With this information and the viscosity of the fuel, the Density Meter can determine:
Mass of fuel delivered
Calorific value
Anticipated combustion performance ( CCAI)
Hydrometers are available in three ranges. One of each is supplied with the Density Meter.
Note: The Density Meter must not be used for heating any liquids other than diesel or residual fuel oils. It is not suitable for use with any fuels with a low flash point temperature ( e.g. gasoline) . |
Your inquiry will be recorded in "Member Trade Mail". |
Recommend to your friends |
|
|
)